|Total EVA time:||47h 05m|
|No.||Date||Together with||Time||Main tasks and notes|
|1||01.10.1997||V. Titov||5h 01m||
Recovery of experiments from DM (EDFT-06)
|2||22.04.2001||C. Hadfield||7h 10m||
Installing the Canadian built robotic arm (57.7 foot long) called: Canadarm2
|3||24.04.2001||C. Hadfield||7h 40m||
Connecting the Power and Data Grapple Fixture circuits for the robotic arm
|4||26.10.2007||D. Wheelock||6h 14m||
Retrieve and stow S-band Antenna Support Assembly, detach Node 2 ("Harmony") heater cables and remove cover from Node 2 aft berthing mechanism, stow grapple fixture on Node 2, disconnect Z1/P6 truss fluid lines, install shrouds on P6 radiator and Sequential Shunt Unit, move and attach Node 2 to Node 1 left-hand docking port with Station robotic arm, pressurise area between Node 1 and Node 2 hatches, perform leak check, open Node 1 hatch
|5||28.10.2007||D. Tani||6h 33m||
Disconnect Z1 to P6 truss cables and unbolt P6; outfit outside Node 2 with handrails, worksite interface fixtures, gap spanners and install thermal covers, remote Node 2 berthing mechanism restraints; install grapple fixture on Node 2; configure squib firing unit on S1 truss for deploying radiators.
|6||30.10.2007||D. Wheelock||7h 08m||
The astronauts bolt P6 truss to P5 truss, attached P5 to P6 cabling, removed P6 radiator restraint and cover on Sequential Shunt unit and deploy radiator, configured squib firing unit on P1 truss, relocated main Bus Switching Unit from the Shuttle Cargo Bay to External Stowage Platform 2.
|7||03.11.2007||D. Wheelock||7h 19m||
Attaching cufflink-like clips across the 15-foot width of the torn P6-4B solar array blanket to provide the strength needed to permit its full extension. This dramatic repair job was carried out successful.